Pick a size in the table below to see its own drawing and 3D model.
Inserts / Whirling Inserts (ISO 5835)
ISO 5835
9 sizes available · 11 specification fields
ISO 5835 is a thread-whirling tool. It is listed here in 9 sizes, each with full specifications and a dimensioned drawing. Typical use: high-speed thread whirling on Swiss-type machines.
Specifications
| Product code | Clearance angle (deg) | Standard | Thickness (mm) | Minimum cutting diameter (mm) | Dimension e — see drawing (mm) | Diameter, contact face (mm) | Corner radius, right (mm) | Corner radius, left (mm) | Wedge angle (deg) | Depth of cut, maximum (mm) | Maximum diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| T09.HA150.D12 | 35 | HA1.5 | 0.5 | 1.0 to 1.1 | 0.1 | 1.35 to 1.5 | 0.3 | 0.1 | 3 | 4 | 9 |
| T09.HA200.D12 | 35 | HA2.0 | 0.6 | 1.2 to 1.3 | 0.1 | 1.85 to 2.0 | 0.4 | 0.1 | 3 | 4 | 9 |
| T09.HA270.D12 | 35 | HA2.7 | 1 | 1.75 to 1.9 | 0.1 | 2.55 to 2.7 | 0.6 | 0.2 | 3 | 4 | 9.5 |
| T09.HA350.D12 | 35 | HA3.5 | 1.25 | 2.25 to 2.4 | 0.1 | 3.35 to 3.5 | 0.8 | 0.2 | 3 | 4 | 10 |
| T09.HA400.D12 | 35 | HA4.0 | 1.5 | 2.75 to 2.9 | 0.1 | 3.85 to 4.0 | 0.8 | 0.2 | 3 | 4 | 10.5 |
| T09.HA450.D12 | 35 | HA4.5 | 1.75 | 2.85 to 3.0 | 0.1 | 4.35 to 4.5 | 1 | 0.3 | 3 | 4 | 11 |
| T09.HA500.D12 | 35 | HA5.0 | 1.75 | 3.35 to 3.5 | 0.1 | 4.85 to 5.0 | 1 | 0.3 | 3 | 4 | 11 |
| T09.HB400.D12 | 25 | HB4.0 | 1.75 | 1.75 to 1.9 | 0.1 | 3.85 to 4.0 | 0.8 | 0.3 | 5 | 4 | 9.5 |
| T09.HB650.D12 | 25 | HB6.5 | 2.75 | 2.85 to 3.0 | 0.2 | 6.35 to 6.5 | 1.2 | 0.8 | 5 | 4 | 11 |
Column codes
- α — Clearance angle (deg)
- Standard — Standard
- TP — Thickness (mm)
- DCN — Minimum cutting diameter (mm)
- e — Dimension e — see drawing (mm)
- DCF — Diameter, contact face (mm)
- RER — Corner radius, right (mm)
- REL — Corner radius, left (mm)
- β — Wedge angle (deg)
- APMX — Depth of cut, maximum (mm)
- DCX — Maximum diameter (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.