Skip to content
Axior

Press Enter for the full search

0
ASK-EM — dimensioned drawing

Pick a size in the table below to see its own drawing and 3D model.

Rotating Tools / DIN ISO 7388-1 (SK DIN 69871) / SK End Mill Holder

ASK-EM

12 sizes available · 8 specification fields

ASK-EM is an SK-taper (DIN 69871) spindle tool holder. It is listed here in 12 sizes, Ø40 mm shank, each with full specifications and a dimensioned drawing. Typical use: holding cutters on an SK / CAT machine spindle.

Choose a size ↓ Ask about ASK-EM

Specifications

12 sizes
Product code Spindle / taper size Clamping / retention thread Bore diameter (mm) Body length (mm) Connection diameter, workpiece side (mm) Protruding / projection length (mm) Second bore diameter (mm) Weight (kg)
ASK40-EM-25-090 40 M16 63 80.9 25 90 49.7 2.2
ASK40-EM-10-063 40 M16 35 43.9 10 63 – 1.23
ASK40-EM-08-050 40 M16 28 30.9 8 50 – 0.93
ASK40-EM-12-050 40 M16 42 43.9 12 50 – 1.05
ASK40-EM-12-100 40 M16 42 80.9 12 100 – 1.55
ASK40-EM-16-063 40 M16 48 43.9 16 63 – 1.28
ASK40-EM-16-100 40 M16 48 80.9 16 100 – 1.77
ASK40-EM-20-063 40 M16 52 43.9 20 63 49.7 1.31
ASK40-EM-20-100 40 M16 52 80.9 20 100 49.7 1.88
ASK40-EM-25-100 40 M16 63 70.9 25 100 49.7 2.2
ASK40-EM-32-100 40 M16 72 80.9 32 100 49.7 2.55
ASK40-EM-40-120 40 M16 80 100.9 40 120 49.7 3.42
Column codes
  • SS — Spindle / taper size
  • CRKS — Clamping / retention thread
  • BD — Bore diameter (mm)
  • LB — Body length (mm)
  • DCONWS — Connection diameter, workpiece side (mm)
  • LPR — Protruding / projection length (mm)
  • BD2 — Second bore diameter (mm)
  • KG — Weight (kg)

Dimensions in millimetres unless noted. Values are the manufacturer's published figures.