Pick a size in the table below to see its own drawing and 3D model.
Rotating Tools / ISO 26623-1 / Polygonal Shank Toolholder Axial
AC-ASHR
7 sizes available · 12 specification fields
AC-ASHR is a polygonal-taper (Capto-style) tool holder. It is listed here in 7 sizes, 16–32 mm shank height, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: quick-change tooling on a polygonal machine interface.
Specifications
| Product code | Bore diameter (mm) | Connection diameter, machine side (mm) | Functional length (mm) | Shank height (mm) | Functional width (mm) | WSC | Overall height (mm) | RADW | Hand | Edge chamfer angle (deg) | SCWS | Protruding / projection length (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AC6-ASHL-2020-1-H | 90 | 63 | 26.5 | 20 | 10 | 20 | 74 | 30 | L | 30 | 104 | 100 |
| AC6-ASHL-2525-1-H | 100 | 63 | 30 | 25 | 13 | 25 | 82 | 38 | L | 27 | 25 | 120 |
| AC4-ASHR-1616-1-H | 60 | 40 | 34 | 16 | 7 | 16 | 50 | 43.5 | R | 30 | 104 | 104 |
| AC5-ASHR-2020-1-H | 90 | 50 | 24.05 | 20 | 10 | 20 | 78 | 59 | R | 30 | 98 | 98 |
| AC6-ASHR-2020-1-H | 90 | 63 | 26.05 | 20 | 10 | 20 | 74 | 59 | R | 30 | 100 | 100 |
| AC6-ASHR-2525-1-H | 100 | 63 | 30 | 25 | 13 | 25 | 82 | 70 | R | 27 | 120 | 120 |
| AC8-ASHR-3232-1-H | 109 | 80 | 40 | 32 | 8 | 32 | 87 | 80 | R | 27 | 140 | 140 |
Column codes
- BD — Bore diameter (mm)
- DCONMS — Connection diameter, machine side (mm)
- LF — Functional length (mm)
- H — Shank height (mm)
- WF — Functional width (mm)
- WSC — WSC
- OAH — Overall height (mm)
- RADW — RADW
- HAND — Hand
- ECA — Edge chamfer angle (deg)
- SCWS — SCWS
- LPR — Protruding / projection length (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.