Pick a size in the table below to see its own drawing and 3D model.
Rotating Tools / JIS B 6339 (MAS 403 BT) / Akplus End Mill Holder
ABBT30-EM
7 sizes available · 8 specification fields
ABBT30-EM is a machine-side tool holder. It is listed here in 7 sizes, Ø30 mm shank, each with full specifications and a dimensioned drawing. Typical use: holding shell mills and end mills on the machine spindle.
Specifications
| Product code | Spindle / taper size | Clamping / retention thread | Bore diameter (mm) | Body length (mm) | Connection diameter, workpiece side (mm) | Protruding / projection length (mm) | Second bore diameter (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| ABBT30-EM-06-050 | 30 | M12 | 25 | 28 | 6 | 50 | 0 | 0.46 |
| ABBT30-EM-08-050 | 30 | M12 | 28 | 28 | 8 | 50 | 0 | 0.49 |
| ABBT30-EM-10-050 | 30 | M12 | 35 | 28 | 10 | 50 | 0 | 0.54 |
| ABBT30-EM-12-050 | 30 | M12 | 42 | 28 | 12 | 50 | 0 | 0.6 |
| ABBT30-EM-14-050 | 30 | M12 | 44 | 28 | 14 | 50 | 0 | 0.61 |
| ABBT30-EM-16-063 | 30 | M12 | 48 | 43 | 16 | 63 | 0 | 0.9 |
| ABBT30-EM-18-063 | 30 | M12 | 50 | 43 | 18 | 63 | 45 | 0.88 |
Column codes
- SS — Spindle / taper size
- CRKS — Clamping / retention thread
- BD — Bore diameter (mm)
- LB — Body length (mm)
- DCONWS — Connection diameter, workpiece side (mm)
- LPR — Protruding / projection length (mm)
- BD2 — Second bore diameter (mm)
- KG — Weight (kg)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
