Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / Ball Nose Screws
Ball-Nose Finishing Screws
9 sizes available · 5 specification fields
Ball-Nose Finishing Screws is a family of replacement clamp screws. It is listed here in 9 sizes, each with full specifications and a dimensioned drawing. Typical use: clamping the insert or head on its tool holder.
Specifications
| Product code | a (M) | Dimension b — see drawing (mm) | Dimension c — see drawing (mm) | Dimension d — see drawing (mm) | Shank width (mm) |
|---|---|---|---|---|---|
| 1208-M3X7 | M3X0.5 | 6.9 | 2.7 | 4.1 | 8 |
| 1215-M4X0.5X9 | M4X0.5 | 8.6 | 3.2 | 5.75 | 15 |
| 1220-M5X0.5X9 | M5X0.5 | 9.6 | 3.4 | 6.8 | 20 |
| 1220-M5X0.5X12 | M5X0.5 | 12.9 | 4.4 | 7.4 | 20 |
| 1220-M5X0.5X15 | M5X0.5 | 16.4 | 6 | 7.8 | 20 |
| 1220-M6X0.75X20 | M6X0.75 | 20 | 6 | 9.4 | 20 |
| 1204-M8X0.75X26 | M8X0.75 | 26 | 7.5 | 12 | 4 |
| 1210-M3.5X9.6 | M3.5X0.6 | 9.6 | 4 | 4.7 | 10 |
| 1215-M4X13.5 | M4X0.7 | 13.5 | 5 | 5.8 | 15 |
Column codes
- a (M) — a (M)
- b — Dimension b — see drawing (mm)
- c — Dimension c — see drawing (mm)
- d — Dimension d — see drawing (mm)
- B(T) — Shank width (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.