AC-TDJNR/L

16 sizes available · 7 specification fields · standard: ISO

AC-TDJNR/L is a monoblock (one-piece) turning holder that takes negative 55° rhombic (D-type) inserts. It is listed here in 16 sizes, Ø32–80 mm shank, 93° approach angle, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: external turning where a rigid, integral shank is preferred.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

DN.. 110408
DN.. 150608

Choose a size ↓ Ask about AC-TDJNR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Connection diameter, machine side (mm)	Tool cutting edge angle (deg)	Functional length (mm)	Functional width (mm)
AC3 TDJNR 22045 11	DN.. 110408	R	32	93	45	22
AC4 TDJNR 27050 11	DN.. 110408	R	40	93	50	27
AC5 TDJNR 35060 11 H	DN.. 110408	R	50	93	60	35
AC6 TDJNR 45065 11 H	DN.. 110408	R	63	93	65	45
AC3 TDJNL 22045 11	DN.. 110408	L	32	93	45	22
AC4 TDJNL 27050 11 H	DN.. 110408	L	40	93	50	27
AC5 TDJNL 35060 11 H	DN.. 110408	L	50	93	60	35
AC6 TDJNL 45065 11 H	DN.. 110408	L	63	93	65	45
AC4 TDJNL 27060 15 H	DN.. 150608	L	40	93	60	27
AC5 TDJNL 35060 15 H	DN.. 150608	L	50	93	60	35
AC6 TDJNL 45065 15 H	DN.. 150608	L	63	93	65	45
AC8 TDJNL 55080 15 H	DN.. 150608	L	80	93	80	55
AC4 TDJNR 27060 15 H	DN.. 150608	R	40	93	60	27
AC5 TDJNR 35060 15 H	DN.. 150608	R	50	93	60	35
AC6 TDJNR 45065 15 H	DN.. 150608	R	63	93	65	45
AC8 TDJNR 55080 15 H	DN.. 150608	R	80	93	80	55