Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / S-System Boring Bars
SET-S/SDUCR/L
3 sizes available · 10 specification fields · standard: ISO
SET-S/SDUCR/L is a boring bar for internal turning that takes positive 55° rhombic (D-type) inserts. It is listed here in 3 sizes, 9–14.8 mm shank height, right-hand versions, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- DC.T 0702..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Connection diameter (mm) | Bore diameter (mm) | Functional length (mm) | Functional width (mm) | Usable length (mm) | Shank height (mm) | Minimum working diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|
| S10K SDUCR/L 07 | DC.T 0702.. | R | 10 | 10 | 125 | 8 | 25 | 9 | ≥13 |
| S12K SDUCR/L 07 | DC.T 0702.. | R | 12 | 12 | 125 | 9 | 25 | 11 | ≥16 |
| S16P SDUCR/L 07 | DC.T 0702.. | R | 16 | 16 | 170 | 11 | 35 | 14.8 | ≥20 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DCON — Connection diameter (mm)
- BD — Bore diameter (mm)
- LF — Functional length (mm)
- WF — Functional width (mm)
- LU=OHN — Usable length (mm)
- H — Shank height (mm)
- D min — Minimum working diameter (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
