Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / S-System Face And Copy Modular End Mills (SCREW Type Tools)
AEMR-RO-H
5 sizes available · 10 specification fields · standard: WLTR
AEMR-RO-H is a face milling cutter that takes round (R-type) inserts. It is listed here in 5 sizes, Ø20–42 mm cutting diameter, right-hand versions, each with full specifications and a dimensioned drawing. Typical use: face milling and facing of flat surfaces.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- RO..10T3..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Cutting diameter (mm) | Connection diameter (mm) | Contact-face diameter, machine side (mm) | Functional length (mm) | Effective cutting edges | Depth of cut, maximum (mm) | Thread depth (mm) |
|---|---|---|---|---|---|---|---|---|---|
| AEMR-RO10-D20-M10-L30-Z02-H | RO..10T3.. | R | 20 | 10.5 | 18 | 30 | 2 | 5 | M10 |
| AEMR-RO10-D25-M12-L35-Z03-H | RO..10T3.. | R | 25 | 12.5 | 21 | 35 | 3 | 5 | M12 |
| AEMR-RO10-D32-M16-L40-Z04-H | RO..10T3.. | R | 32 | 17 | 29 | 40 | 4 | 5 | M16 |
| AEMR-RO10-D35-M16-L40-Z04-H | RO..10T3.. | R | 35 | 17 | 29 | 40 | 4 | 5 | M16 |
| AEMR-RO10-D42-M16-L40-Z05-H | RO..10T3.. | R | 42 | 17 | 29 | 40 | 5 | 5 | M16 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DC — Cutting diameter (mm)
- DCON — Connection diameter (mm)
- DCSFMS — Contact-face diameter, machine side (mm)
- LF — Functional length (mm)
- ZEFP — Effective cutting edges
- APMX — Depth of cut, maximum (mm)
- TDZ — Thread depth (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
