Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / S-System Modular End Mills (SCREW Type Tools)
AEM90-TNG-H
10 sizes available · 10 specification fields · standard: PRMT
AEM90-TNG-H is an indexable end mill that takes negative 60° triangle (T-type) inserts. It is listed here in 10 sizes, Ø20–35 mm cutting diameter, right-hand versions, each with full specifications and a dimensioned drawing. Typical use: shoulder milling, slotting, ramping and pocketing.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- TNG10
- TNGX 1004..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Cutting diameter (mm) | Connection diameter (mm) | Contact-face diameter, machine side (mm) | Functional length (mm) | Effective cutting edges | Depth of cut, maximum (mm) | Thread depth (mm) |
|---|---|---|---|---|---|---|---|---|---|
| AEM90-TNG10-D20-M10-L26-Z02-H | TNG10 | R | 20 | 10.5 | 18 | 26 | 2 | 5 | M10 |
| AEM90-TNG10-D20-M10-L26-Z03-H | TNG10 | R | 20 | 10.5 | 18 | 26 | 3 | 5 | M10 |
| AEM90-TNG10-D21-M10-L25-Z03-H | TNGX 1004.. | R | 21 | 10.5 | 18 | 25 | 3 | 5 | M10 |
| AEM90-TNG10-D25-M12-L33-Z03-H | TNG10 | R | 25 | 12.5 | 21 | 33 | 3 | 5 | M12 |
| AEM90-TNG10-D25-M12-L33-Z04-H | TNG10 | R | 25 | 12.5 | 21 | 33 | 4 | 5 | M12 |
| AEM90-TNG10-D26-M12-L30-Z04-H | TNGX 1004.. | R | 26 | 12.5 | 21 | 30 | 4 | 5 | M12 |
| AEM90-TNG10-D32-M16-L43-Z04-H | TNG10 | R | 32 | 17 | 29 | 43 | 4 | 5 | M16 |
| AEM90-TNG10-D32-M16-L43-Z05-H | TNG10 | R | 32 | 17 | 29 | 43 | 5 | 5 | M16 |
| AEM90-TNG10-D33-M16-L43-Z05-H | TNGX 1004.. | R | 33 | 17 | 29 | 43 | 5 | 5 | M16 |
| AEM90-TNG10-D35-M16-L43-Z05-H | TNGX 1004.. | R | 35 | 17 | 29 | 43 | 5 | 5 | M16 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DC — Cutting diameter (mm)
- DCON — Connection diameter (mm)
- DCSFMS — Contact-face diameter, machine side (mm)
- LF — Functional length (mm)
- ZEFP — Effective cutting edges
- APMX — Depth of cut, maximum (mm)
- TDZ — Thread depth (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
