Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / T-System External Turning Toolholders
TDJNR/L-H
8 sizes available · 7 specification fields · standard: ISO
TDJNR/L-H is an external turning tool holder that takes negative 55° rhombic (D-type) inserts. It is listed here in 8 sizes, 20–32 × 20–32 mm shank, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: external turning, facing and profiling.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- DN.. 1104..
- DNM. 1506..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Functional length (mm) | Functional width (mm) | Functional height (mm) | Shank width (mm) |
|---|---|---|---|---|---|---|
| TDJNR 2525 M11-H | DN.. 1104.. | R | 150 | 12 | 25 | 25 |
| TDJNL 2525 M11-H | DN.. 1104.. | L | 150 | 12 | 25 | 25 |
| TDJNL 2020 K15-H | DNM. 1506.. | L | 125 | 25 | 20 | 20 |
| TDJNR 2020 K15-H | DNM. 1506.. | R | 125 | 25 | 20 | 20 |
| TDJNL 2525 M15-H | DNM. 1506.. | L | 150 | 32 | 25 | 25 |
| TDJNR 2525 M15-H | DNM. 1506.. | R | 150 | 32 | 25 | 25 |
| TDJNL 3232 P15-H | DNM. 1506.. | L | 170 | 40 | 32 | 32 |
| TDJNR 3232 P15-H | DNM. 1506.. | R | 170 | 40 | 32 | 32 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- LF — Functional length (mm)
- WF — Functional width (mm)
- HF=H — Functional height (mm)
- B — Shank width (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
