Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / Ball Nose Mills
APMR-P
8 sizes available · 8 specification fields · standard: WLTR
APMR-P is an indexable milling cutter that takes pentagon (P-type) inserts. It is listed here in 8 sizes, Ø10–32 mm shank, right-hand versions, each with full specifications and a dimensioned drawing. Typical use: milling of steel, stainless and cast iron.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- P3208
- P3210
- P3212
- P3216
- P3220
- P3225
- P3232
Specifications
| Product code | Insert designation | Cutting direction (hand) | Connection diameter (mm) | Functional length (mm) | Maximum diameter (mm) | Head length (mm) | Corner radius (mm) |
|---|---|---|---|---|---|---|---|
| APMR-P3208-D08-C10-L110 | P3208 | R | 10 | 110 | 8 | 25 | 4 |
| APMR-P3210-D10-C10-L130 | P3210 | R | 10 | 130 | 10 | 30 | 5 |
| APMR-P3210-D10-C12-L130 | P3210 | R | 12 | 130 | 10 | 30 | 5 |
| APMR-P3212-D12-C12-L130 | P3212 | R | 12 | 130 | 12 | 32 | 6 |
| APMR-P3216-D16-C16-L175 | P3216 | R | 16 | 175 | 16 | 75 | 8 |
| APMR-P3220-D20-C20-L200 | P3220 | R | 20 | 200 | 20 | 100 | 10 |
| APMR-P3225-D25-C25-L200 | P3225 | R | 25 | 200 | 25 | 100 | 12.5 |
| APMR-P3232-D32-C32-L200 | P3232 | R | 32 | 200 | 32 | 100 | 16 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DCON — Connection diameter (mm)
- LF — Functional length (mm)
- DCX — Maximum diameter (mm)
- LH — Head length (mm)
- RE — Corner radius (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
