Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / C-System External Turning Toolholders
CDJNR/L
6 sizes available · 7 specification fields · standard: ISO
CDJNR/L is an external turning tool holder that takes negative 55° rhombic (D-type) inserts. It is listed here in 6 sizes, 25–32 × 25–32 mm shank, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: external turning, facing and profiling.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- DN.. 1207..
- DN.N 1507..
Specifications
| Product code | Insert designation | Cutting direction (hand) | ATUM Ø | Functional width (mm) | Functional height (mm) | Shank width (mm) |
|---|---|---|---|---|---|---|
| CDJNL 2525 M1207C | DN.. 1207.. | L | 150 | 32 | 25 | 25 |
| CDJNR 2525 M1207C | DN.. 1207.. | R | 150 | 32 | 25 | 25 |
| CDJNL 2525 M1507C | DN.N 1507.. | L | 150 | 32 | 25 | 25 |
| CDJNR 2525 M1507C | DN.N 1507.. | R | 150 | 32 | 25 | 25 |
| CDJNL 3232 P1507C | DN.N 1507.. | L | 170 | 40 | 32 | 32 |
| CDJNR 3232 P1507C | DN.N 1507.. | R | 170 | 40 | 32 | 32 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- ATUM Ø — ATUM Ø
- WF — Functional width (mm)
- HF=H — Functional height (mm)
- B — Shank width (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
