Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / Disc Milling
ASDM-SPGT
11 sizes available · 10 specification fields · standard: ZCC
ASDM-SPGT is an indexable milling cutter that takes SPGT-style inserts. It is listed here in 11 sizes, Ø80–200 mm cutting diameter, right-hand versions, each with full specifications and a dimensioned drawing. Typical use: milling of steel, stainless and cast iron.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- SPGT 050204
- SPGT 060204
- SPGT 07T308
Specifications
| Product code | Insert designation | Cutting direction (hand) | Cutting diameter (mm) | Connection diameter (mm) | Effective cutting edges | Cutting width (mm) | Total cutting edges | Cutting depth, maximum (mm) | Thread — 'UB' dim (mm) |
|---|---|---|---|---|---|---|---|---|---|
| ASDM-SPGT05-D80x6-d27-Z10 | SPGT 050204 | R | 80 | 27 | 5 | 6 | 10 | 17 | 10 |
| ASDM-SPGT05-D100x6-d32-Z12 | SPGT 050204 | R | 100 | 32 | 6 | 6 | 12 | 25 | 10 |
| ASDM-SPGT05-D125x6-d40-Z14 | SPGT 050204 | R | 125 | 40 | 7 | 6 | 14 | 35 | 10 |
| ASDM-SPGT05-D160x6-d40-Z18 | SPGT 050204 | R | 160 | 40 | 9 | 6 | 18 | 52 | 10 |
| ASDM-SPGT06-D80x7-d27-Z10 | SPGT 060204 | R | 80 | 27 | 5 | 7 | 10 | 17 | 11 |
| ASDM-SPGT06-D100x7-d32-Z12 | SPGT 060204 | R | 100 | 32 | 6 | 7 | 12 | 25 | 11 |
| ASDM-SPGT06-D125x7-d40-Z14 | SPGT 060204 | R | 125 | 40 | 7 | 7 | 14 | 35 | 11 |
| ASDM-SPGT06-D160x7-d40-Z16 | SPGT 060204 | R | 160 | 40 | 8 | 7 | 16 | 52 | 11 |
| ASDM-SPGT06-D200x7-d40-Z18 | SPGT 060204 | R | 200 | 40 | 9 | 7 | 18 | 70 | 11 |
| ASDM-SPGT07-D100x10-d27-Z10 | SPGT 07T308 | R | 100 | 27 | 5 | 10 | 10 | 26.5 | 14 |
| ASDM-SPGT07-D100x10-d32-Z12 | SPGT 07T308 | R | 100 | 32 | 6 | 10 | 12 | 25 | 11 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DC — Cutting diameter (mm)
- DCON — Connection diameter (mm)
- ZEFP ETKILI — Effective cutting edges
- CW — Cutting width (mm)
- ZEFP Toplam — Total cutting edges
- CDX — Cutting depth, maximum (mm)
- THUB — Thread — 'UB' dim (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
