Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / Helix Chamfer Milling Tools
AHM
5 sizes available · 11 specification fields · standard: ISO
AHM is an indexable milling cutter that takes AP-style inserts. It is listed here in 5 sizes, Ø35 mm cutting diameter, 15–75° approach angle, right-hand versions, each with full specifications and a dimensioned drawing. Typical use: milling of steel, stainless and cast iron.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- AP.. 1604..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Cutting diameter (mm) | Connection diameter (mm) | Functional length (mm) | Tool cutting edge angle (deg) | Maximum diameter (mm) | Depth of cut, maximum (mm) | Effective cutting edges | Total cutting edges |
|---|---|---|---|---|---|---|---|---|---|---|
| AHM15-AP16-D35x93-A27-Z0306-H | AP.. 1604.. | R | 35 | 27 | 50 | 15 | 93 | 8 | 3 | 6 |
| AHM30-AP16-D35x87-A27-Z0306-H | AP.. 1604.. | R | 35 | 27 | 50 | 30 | 87 | 15 | 3 | 6 |
| AHM45-AP16-D35x77-A27-Z0306-H | AP.. 1604.. | R | 35 | 27 | 50 | 45 | 77 | 21.5 | 3 | 6 |
| AHM60-AP16-D35x65-A22-Z0306-H | AP.. 1604.. | R | 35 | 22 | 50 | 60 | 65 | 26.5 | 3 | 6 |
| AHM75-AP16-D35x50-A22-Z0306-H | AP.. 1604.. | R | 35 | 22 | 50 | 75 | 50 | 29.5 | 3 | 6 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DC — Cutting diameter (mm)
- DCON — Connection diameter (mm)
- LF — Functional length (mm)
- KAPR — Tool cutting edge angle (deg)
- DCX — Maximum diameter (mm)
- APMX — Depth of cut, maximum (mm)
- ZEFP ETKILI — Effective cutting edges
- ZEFP Toplam — Total cutting edges
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.