Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / M-System Boring Bars
MCLNR/L
6 sizes available · 8 specification fields · standard: ISO
MCLNR/L is a boring bar for internal turning that takes negative 80° rhombic (C-type) inserts. It is listed here in 6 sizes, 18.3–30 mm shank height, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- CNM. 1204..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Connection diameter (mm) | Functional length (mm) | Functional width (mm) | Shank height (mm) | Minimum working diameter (mm) |
|---|---|---|---|---|---|---|---|
| S20R MCLNL 12 | CNM. 1204.. | L | 20 | 200 | 13 | 18.3 | ≥25 |
| S20R MCLNR 12 | CNM. 1204.. | R | 20 | 200 | 13 | 18.3 | ≥25 |
| S25S MCLNL 12 | CNM. 1204.. | L | 25 | 250 | 17 | 23 | ≥32 |
| S25S MCLNR 12 | CNM. 1204.. | R | 25 | 250 | 17 | 23 | ≥32 |
| S32T MCLNL 12 | CNM. 1204.. | L | 32 | 300 | 22 | 30 | ≥40 |
| S32T MCLNR 12 | CNM. 1204.. | R | 32 | 300 | 22 | 30 | ≥40 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DCON — Connection diameter (mm)
- LF — Functional length (mm)
- WF — Functional width (mm)
- H — Shank height (mm)
- D min — Minimum working diameter (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
