Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / Mimill Tools
AMM-MM-S
9 sizes available · 8 specification fields
AMM-MM-S is an indexable milling cutter that takes 86° rhombic (M-type) inserts. It is listed here in 9 sizes, 11–18 mm shank height, right-hand versions, each with full specifications and a dimensioned drawing. Typical use: milling of steel, stainless and cast iron.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- MM1803...
- MM2203...
- MM2806
- MM3306...
Specifications
| Product code | Insert designation | Cutting direction (hand) | Functional length (mm) | Connection diameter, machine side (mm) | Overhang, nominal (mm) | Connection diameter, workpiece side (mm) | Shank height (mm) |
|---|---|---|---|---|---|---|---|
| AMM-MM1803-W12-L070-S | MM1803... | R | 70 | 12 | 18 | 9 | 11 |
| AMM-MM1803-W16-L080-S | MM1803... | R | 80 | 16 | 26 | 9 | 15 |
| AMM-MM2203-W12-L070-S | MM2203... | R | 70 | 12 | 18 | 12 | 11 |
| AMM-MM2203-W16-L080-S | MM2203... | R | 80 | 16 | 26 | 12 | 15 |
| AMM-MM2806-W12-L070-S | MM2806 | R | 70 | 12 | 20 | 14.5 | 11 |
| AMM-MM2806-W16-L090-S | MM2806 | R | 90 | 16 | 36 | 14.5 | 15 |
| AMM-MM2806-W20-L100-S | MM2806 | R | 100 | 20 | 36 | 14.5 | 18 |
| AMM-MM3306-W16-L090-S | MM3306... | R | 90 | 16 | 36 | 14.5 | 15 |
| AMM-MM3306-W20-L100-S | MM3306... | R | 100 | 20 | 36 | 14.5 | 18 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- LF — Functional length (mm)
- DCONMS — Connection diameter, machine side (mm)
- OHN — Overhang, nominal (mm)
- DCONWS — Connection diameter, workpiece side (mm)
- H — Shank height (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
