Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / S-System Boring Bars
SET-E/SDUCR/L
3 sizes available · 7 specification fields · standard: ISO
SET-E/SDUCR/L is a boring bar for internal turning. It is listed here in 3 sizes, 9.5–15 mm shank height, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.
Specifications
| Product code | Bore diameter (mm) | Functional length (mm) | Shank height (mm) | Functional width (mm) | Connection diameter (mm) | Overhang, nominal (mm) |
|---|---|---|---|---|---|---|
| E10M SDUCR/L 07 | 10 | 150 | 9.5 | 8 | 10 | 9 |
| E12Q SDUCR/L 07 | 12 | 180 | 11 | 9 | 12 | 10 |
| E16R SDUCR/L 11 | 16 | 200 | 15 | 11 | 16 | 12 |
Column codes
- BD — Bore diameter (mm)
- LF — Functional length (mm)
- H — Shank height (mm)
- WF — Functional width (mm)
- DCON — Connection diameter (mm)
- OHN — Overhang, nominal (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
