Skip to content
Axior

Pick a size in the table below to see its own drawing and 3D model.

Tool Holders / S-System Boring Bars

SVXBR/L

14 sizes available · 10 specification fields · standard: ISO

SVXBR/L is a boring bar for internal turning that takes 35° rhombic (V-type) inserts. It is listed here in 14 sizes, 14.8–37.5 mm shank height, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

  • VB.. 1102..
  • VB.T 1103..
  • VB.T 1604..
Choose a size ↓ Ask about SVXBR/L

Specifications

14 sizes
Product code Insert designation Cutting direction (hand) Connection diameter (mm) Protruding / projection length (mm) Functional length (mm) Functional width (mm) Depth of cut, maximum (mm) Shank height (mm) Minimum working diameter (mm)
S20R SVXBL 1102 VB.. 1102.. L 20 200 – 13 5.7 18.3 ≥25
S16P SVXBR 1102 VB.. 1102.. R 16 170 – 12.5 7.2 14.8 ≥20
S16P SVXBL 1102 VB.. 1102.. L 16 170 – 12.5 7.2 14.8 ≥20
S20R SVXBR 1102 VB.. 1102.. R 20 – 200 13 – 18.3 –
S16P SVXBL 11 VB.T 1103.. L 16 170 – 12.5 7.2 14.8 ≥21
S16P SVXBR 11 VB.T 1103.. R 16 170 – 12.5 7.2 14.8 ≥21
S20R SVXBL 11 VB.T 1103.. L 20 200 – 13 5.7 18.3 ≥25
S20R SVXBR 11 VB.T 1103.. R 20 200 – 13 5.7 18.3 ≥25
S25S SVXBL 16 VB.T 1604.. L 25 250 – 19 10.2 23 ≥32
S25S SVXBR 16 VB.T 1604.. R 25 250 – 19 10.2 23 ≥32
S32T SVXBL 16 VB.T 1604.. L 32 300 – 22 11.7 30 ≥40
S32T SVXBR 16 VB.T 1604.. R 32 300 – 22 11.7 30 ≥40
S40U SVXBL 16 VB.T 1604.. L 40 350 – 27 14.3 37.5 ≥50
S40U SVXBR 16 VB.T 1604.. R 40 350 – 27 14.3 37.5 ≥50
Column codes
  • Insert Code — Insert designation
  • Product Direction — Cutting direction (hand)
  • DCON — Connection diameter (mm)
  • LPR — Protruding / projection length (mm)
  • LF — Functional length (mm)
  • WF — Functional width (mm)
  • APMX — Depth of cut, maximum (mm)
  • H — Shank height (mm)
  • D min — Minimum working diameter (mm)

Dimensions in millimetres unless noted. Values are the manufacturer's published figures.