Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / S-System Cartridge
SCLCR/L
8 sizes available · 9 specification fields · standard: ISO
SCLCR/L is an insert cartridge that takes positive 80° rhombic (C-type) inserts. It is listed here in 8 sizes, 11–20 × 7.5–15 mm shank, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: seating replaceable inserts in boring heads and special tools.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- CC.T 060204
- CC.T 09T308
- CC.T 120408
Specifications
| Product code | Insert designation | Cutting direction (hand) | Functional length (mm) | Functional width (mm) | Shank width (mm) | Shank height (mm) | Functional height (mm) | Minimum working diameter (mm) |
|---|---|---|---|---|---|---|---|---|
| SCLCL 08CA 06 | CC.T 060204 | L | 32 | 10 | 7.5 | 11 | 8 | ≥25 |
| SCLCR 08CA 06 | CC.T 060204 | R | 32 | 10 | 7.5 | 11 | 8 | ≥25 |
| SCLCL 10CA 09 | CC.T 09T308 | L | 50 | 14 | 11 | 15 | 10 | ≥40 |
| SCLCR 10CA 09 | CC.T 09T308 | R | 50 | 14 | 11 | 15 | 10 | ≥40 |
| SCLCL 12CA 09 | CC.T 09T308 | L | 55 | 20 | 15 | 20 | 12 | ≥50 |
| SCLCR 12CA 09 | CC.T 09T308 | R | 55 | 20 | 15 | 20 | 12 | ≥50 |
| SCLCL 12CA 12 | CC.T 120408 | L | 55 | 20 | 15 | 20 | 12 | ≥50 |
| SCLCR 12CA 12 | CC.T 120408 | R | 55 | 20 | 15 | 20 | 12 | ≥50 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- LF — Functional length (mm)
- WF — Functional width (mm)
- B — Shank width (mm)
- H — Shank height (mm)
- HF — Functional height (mm)
- D min — Minimum working diameter (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
