Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / S-System End Mills
AEM90-ED
5 sizes available · 9 specification fields · standard: KNMTL
AEM90-ED is an indexable end mill that takes 75° rhombic (E-type) inserts. It is listed here in 5 sizes, Ø16–30 mm cutting diameter, right-hand versions, each with full specifications and a dimensioned drawing. Typical use: shoulder milling, slotting, ramping and pocketing.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- EDPT 10T3..
- EDPT 1404..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Cutting diameter (mm) | Connection diameter (mm) | Functional length (mm) | Head length (mm) | Effective cutting edges | Depth of cut, maximum (mm) |
|---|---|---|---|---|---|---|---|---|
| AEM90-ED10T3-D16-W16-L120-Z02 | EDPT 10T3.. | R | 16 | 16 | 120 | 30 | 2 | 30 |
| AEM90-ED10T3-D20-W20-L120-Z02 | EDPT 10T3.. | R | 20 | 20 | 120 | 30 | 2 | 30 |
| AEM90-ED1404-D20-W20-L150-Z02 | EDPT 1404.. | R | 20 | 20 | 150 | 50 | 2 | 14.5 |
| AEM90-ED1404-D25-W25-L150-Z02 | EDPT 1404.. | R | 25 | 25 | 150 | 50 | 2 | 14.5 |
| AEM90-ED1404-D30-C25-L150-Z03 | EDPT 1404.. | R | 30 | 25 | 150 | 50 | 3 | 14.5 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DC — Cutting diameter (mm)
- DCON — Connection diameter (mm)
- LF — Functional length (mm)
- LH — Head length (mm)
- ZEFP — Effective cutting edges
- APMX — Depth of cut, maximum (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
