Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / T-System Boring Bars
TVUNR/L
6 sizes available · 8 specification fields · standard: ISO
TVUNR/L is a boring bar for internal turning that takes negative 35° rhombic (V-type) inserts. It is listed here in 6 sizes, 23–37.5 mm shank height, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- VNM..1604
- TNM. 1604..
- VNM. 1604..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Connection diameter (mm) | Functional length (mm) | Functional width (mm) | Shank height (mm) | Minimum working diameter (mm) |
|---|---|---|---|---|---|---|---|
| S25S TVUNL 16 | VNM..1604 | L | 25 | 250 | 20 | 23 | ≥36 |
| S25S TVUNR 16 | TNM. 1604.. | R | 25 | 250 | 20 | 23 | ≥36 |
| S32T TVUNL 16 | VNM. 1604.. | L | 32 | 300 | 22 | 30 | ≥40 |
| S32T TVUNR 16 | VNM. 1604.. | R | 32 | 300 | 22 | 30 | ≥40 |
| S40U TVUNL 16 | VNM. 1604.. | L | 40 | 350 | 27 | 37.5 | ≥50 |
| S40U TVUNR 16 | VNM. 1604.. | R | 40 | 350 | 27 | 37.5 | ≥50 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DCON — Connection diameter (mm)
- LF — Functional length (mm)
- WF — Functional width (mm)
- H — Shank height (mm)
- D min — Minimum working diameter (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
