Specifications — APT.06.254.175
| Product Direction | Cutting direction (hand) | R |
|---|---|---|
| LH | Head length (mm) | 28 |
| S | Insert thickness (mm) | 0.8 |
| W | Dimension W — see drawing (mm) | 0.18 |
| L2 | Dimension L2 — see drawing (mm) | 25.4 |
| Ødmin | Minimum diameter (mm) | 6.2 |
| ØD | Diameter (mm) | 6 |
| a | Dimension a — see drawing (mm) | 5.95 |
| d | Dimension d — see drawing (mm) | 3.95 |
| f | Feed (mm/rev) | 2.95 |
| PiTCH min | Minimum thread pitch (mm) | 1.5 |
| PiTCH maks | Maximum thread pitch (mm) | 1.75 |
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
All 14 sizes in APT01
| Product code | Cutting direction (hand) | Head length (mm) | Insert thickness (mm) | Dimension W — see drawing (mm) |
|---|---|---|---|---|
| APT.04.152.080 | R | 18 | 0.45 | 0.1 |
| APT.04.152.050 | R | 18 | 0.35 | 0.06 |
| APT.05.152.100 | R | 18 | 0.55 | 0.12 |
| APT.05.203.100 | R | 23 | 0.55 | 0.12 |
| APT.05.254.100 | R | 28 | 0.55 | 0.12 |
| APT.05.152.075 | R | 18 | 0.45 | 0.09 |
| APT.05.152.050 | R | 18 | 0.35 | 0.06 |
| APT.06.152.125 | R | 18 | 0.55 | 0.12 |
| APT.06.152.150 | R | 18 | 0.75 | 0.16 |
| APT.06.203.125 | R | 23 | 0.75 | 0.16 |
| APT.06.254.125 | R | 28 | 0.75 | 0.16 |
| APT.06.152.175 | R | 18 | 0.8 | 0.18 |
| APT.06.203.175 | R | 23 | 0.8 | 0.18 |
| APT.06.254.175 | R | 28 | 0.8 | 0.18 |