Specifications — APG05.200.203.R100
| Product Direction | Cutting direction (hand) | R |
|---|---|---|
| LH | Head length (mm) | 23 |
| W | Dimension W — see drawing (mm) | 2 |
| L2 | Dimension L2 — see drawing (mm) | 20.3 |
| Ødmin | Minimum diameter (mm) | 5.2 |
| R | Radius (mm) | 1 |
| tmax | Maximum cutting depth (mm) | 1 |
| ØD | Diameter (mm) | 5 |
| a | Dimension a — see drawing (mm) | 4.95 |
| d | Dimension d — see drawing (mm) | 3.75 |
| f | Feed (mm/rev) | 2.45 |
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
All 24 sizes in APG09
| Product code | Cutting direction (hand) | Head length (mm) | Dimension W — see drawing (mm) | Dimension L2 — see drawing (mm) |
|---|---|---|---|---|
| APG04.100.152.R050 | R | 18 | 1 | 15.2 |
| APG04.117.152.R0585 | R | 18 | 1.17 | 15.2 |
| APG05.100.203.R050 | R | 23 | 1 | 20.3 |
| APG05.117.203.R0585 | R | 23 | 1.17 | 20.3 |
| APG05.150.203.R075 | R | 23 | 1.5 | 20.3 |
| APG05.1574.203.R0787 | R | 23 | 1.574 | 20.3 |
| APG05.1626.203.R0813 | R | 23 | 1.626 | 20.3 |
| APG05.198.203.R099 | R | 23 | 1.98 | 20.3 |
| APG05.200.203.R100 | R | 23 | 2 | 20.3 |
| APG06.100.254.R050 | R | 28 | 1 | 25.4 |
| APG06.117.254.R0585 | R | 28 | 1.17 | 25.4 |
| APG06.150.254.R075 | R | 28 | 1.5 | 25.4 |
| APG06.1574.254.R0787 | R | 28 | 1.574 | 25.4 |
| APG06.1626.254.R0813 | R | 28 | 1.626 | 25.4 |
| APG06.198.254.R099 | R | 28 | 1.98 | 25.4 |
| APG06.200.203.R100 | R | 23 | 2 | 20.3 |
| APG06.200.254.R100 | R | 28 | 2 | 25.4 |
| APG07.100.305.R050 | R | 33 | 1 | 30.5 |
| APG07.117.305.R0585 | R | 33 | 1.17 | 30.5 |
| APG07.150.305.R075 | R | 33 | 1.5 | 30.5 |
| APG07.1574.305.R0787 | R | 33 | 1.574 | 30.5 |
| APG07.1626.305.R0813 | R | 33 | 1.626 | 30.5 |
| APG07.198.305.R099 | R | 33 | 1.98 | 30.5 |
| APG07.200.305.R100 | R | 33 | 2 | 30.5 |