Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / Grooving Mini Cut Tools
APG09
24 sizes available · 11 specification fields
APG09 is a small-part / Swiss-type turning tool. It is listed here in 24 sizes, right-hand versions, each with full specifications and a dimensioned drawing. Typical use: turning, grooving and threading of small components.
Specifications
| Product code | Cutting direction (hand) | Head length (mm) | Dimension W — see drawing (mm) | Dimension L2 — see drawing (mm) | Minimum diameter (mm) | Radius (mm) | Maximum cutting depth (mm) | Diameter (mm) | Dimension a — see drawing (mm) | Dimension d — see drawing (mm) | Feed (mm/rev) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| APG04.100.152.R050 | R | 18 | 1 | 15.2 | 4.2 | 0.5 | 0.8 | 4 | 3.95 | 2.95 | 1.95 |
| APG04.117.152.R0585 | R | 18 | 1.17 | 15.2 | 4.2 | 0.585 | 0.8 | 4 | 3.95 | 2.95 | 1.95 |
| APG05.100.203.R050 | R | 23 | 1 | 20.3 | 5.2 | 0.5 | 1 | 5 | 4.95 | 3.75 | 2.45 |
| APG05.117.203.R0585 | R | 23 | 1.17 | 20.3 | 5.2 | 0.585 | 1 | 5 | 4.95 | 3.75 | 2.45 |
| APG05.150.203.R075 | R | 23 | 1.5 | 20.3 | 5.2 | 0.75 | 1 | 5 | 4.95 | 3.75 | 2.45 |
| APG05.1574.203.R0787 | R | 23 | 1.574 | 20.3 | 5.2 | 0.787 | 1 | 5 | 4.95 | 3.75 | 2.45 |
| APG05.1626.203.R0813 | R | 23 | 1.626 | 20.3 | 5.2 | 0.813 | 1 | 5 | 4.95 | 3.75 | 2.45 |
| APG05.198.203.R099 | R | 23 | 1.98 | 20.3 | 5.2 | 0.99 | 1 | 5 | 4.95 | 3.75 | 2.45 |
| APG05.200.203.R100 | R | 23 | 2 | 20.3 | 5.2 | 1 | 1 | 5 | 4.95 | 3.75 | 2.45 |
| APG06.100.254.R050 | R | 28 | 1 | 25.4 | 6.2 | 0.5 | 1.8 | 6 | 5.95 | 3.95 | 2.95 |
| APG06.117.254.R0585 | R | 28 | 1.17 | 25.4 | 6.2 | 0.585 | 1.8 | 6 | 5.95 | 3.95 | 2.95 |
| APG06.150.254.R075 | R | 28 | 1.5 | 25.4 | 6.2 | 0.75 | 1.8 | 6 | 5.95 | 3.95 | 2.95 |
| APG06.1574.254.R0787 | R | 28 | 1.574 | 25.4 | 6.2 | 0.787 | 1.8 | 6 | 5.95 | 3.95 | 2.95 |
| APG06.1626.254.R0813 | R | 28 | 1.626 | 25.4 | 6.2 | 0.813 | 1.8 | 6 | 5.95 | 3.95 | 2.95 |
| APG06.198.254.R099 | R | 28 | 1.98 | 25.4 | 6.2 | 0.99 | 1.8 | 6 | 5.95 | 3.95 | 2.95 |
| APG06.200.203.R100 | R | 23 | 2 | 20.3 | 6.2 | 1 | 1.8 | 6 | 5.95 | 3.95 | 2.95 |
| APG06.200.254.R100 | R | 28 | 2 | 25.4 | 6.2 | 1 | 1.8 | 6 | 5.95 | 3.95 | 2.95 |
| APG07.100.305.R050 | R | 33 | 1 | 30.5 | 7.2 | 0.5 | 2.5 | 7 | 6.95 | 4.25 | 3.45 |
| APG07.117.305.R0585 | R | 33 | 1.17 | 30.5 | 7.2 | 0.585 | 2.5 | 7 | 6.95 | 4.25 | 3.45 |
| APG07.150.305.R075 | R | 33 | 1.5 | 30.5 | 7.2 | 0.75 | 2.5 | 7 | 6.95 | 4.25 | 3.45 |
| APG07.1574.305.R0787 | R | 33 | 1.574 | 30.5 | 7.2 | 0.787 | 2.5 | 7 | 6.95 | 4.25 | 3.45 |
| APG07.1626.305.R0813 | R | 33 | 1.626 | 30.5 | 7.2 | 0.813 | 2.5 | 7 | 6.95 | 4.25 | 3.45 |
| APG07.198.305.R099 | R | 33 | 1.98 | 30.5 | 7.2 | 0.99 | 2.5 | 7 | 6.95 | 4.25 | 3.45 |
| APG07.200.305.R100 | R | 33 | 2 | 30.5 | 7.2 | 1 | 2.5 | 7 | 6.95 | 4.25 | 3.45 |
Column codes
- Product Direction — Cutting direction (hand)
- LH — Head length (mm)
- W — Dimension W — see drawing (mm)
- L2 — Dimension L2 — see drawing (mm)
- Ødmin — Minimum diameter (mm)
- R — Radius (mm)
- tmax — Maximum cutting depth (mm)
- ØD — Diameter (mm)
- a — Dimension a — see drawing (mm)
- d — Dimension d — see drawing (mm)
- f — Feed (mm/rev)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
