PSBNR/L

26 sizes available · 7 specification fields · standard: ISO

PSBNR/L is an external turning tool holder that takes negative square (S-type) inserts. It is listed here in 26 sizes, 16–50 × 16–50 mm shank, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: external turning, facing and profiling.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

SN.. 2507..
SN.. 1906..
SNM. 0903..
SNM. 1204..
SNM. 1506..
SNM. 1906..
SNM. 2509..

Choose a size ↓ Ask about PSBNR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Functional length (mm)	Functional width (mm)	Functional height (mm)	Shank width (mm)
PSBNL 5050 S2507C	SN.. 2507..	L	250	43	50	50
PSBNR 5050 S2507C	SN.. 2507..	R	250	43	50	50
PSBNL 5050 S19C	SN.. 1906..	L	250	45	50	50
PSBNR 5050 S19C	SN.. 1906..	R	250	45	50	50
PSBNL 1616 H09	SNM. 0903..	L	100	13	16	16
PSBNR 1616 H09	SNM. 0903..	R	100	13	16	16
PSBNL 2020 K09	SNM. 0903..	L	125	17	20	20
PSBNR 2020 K09	SNM. 0903..	R	125	17	20	20
PSBNL 2020 K12	SNM. 1204..	L	125	17	20	20
PSBNR 2020 K12	SNM. 1204..	R	125	17	20	20
PSBNL 2525 M12C	SNM. 1204..	L	150	22	25	25
PSBNR 2525 M12C	SNM. 1204..	R	150	22	25	25
PSBNL 3232 P12C	SNM. 1204..	L	170	27	32	32
PSBNR 3232 P12C	SNM. 1204..	R	170	27	32	32
PSBNL 2525 M15	SNM. 1506..	L	150	22	25	25
PSBNR 2525 M15	SNM. 1506..	R	150	22	25	25
PSBNL 3232 P15C	SNM. 1506..	L	170	27	32	32
PSBNR 3232 P15C	SNM. 1506..	R	170	27	32	32
PSBNL 3232 P19C	SNM. 1906..	L	170	27	32	32
PSBNR 3232 P19C	SNM. 1906..	R	170	27	32	32
PSBNL 4040 S19C	SNM. 1906..	L	250	35	40	40
PSBNR 4040 S19C	SNM. 1906..	R	250	35	40	40
PSBNL 4040 S25C	SNM. 2509..	L	250	35	40	40
PSBNR 4040 S25C	SNM. 2509..	R	250	35	40	40
PSBNL 5050 S25C	SNM. 2509..	L	250	43	50	50
PSBNR 5050 S25C	SNM. 2509..	R	250	43	50	50