PTJNR/L

20 sizes available · 7 specification fields · standard: ISO

PTJNR/L is an external turning tool holder that takes negative 60° triangle (T-type) inserts. It is listed here in 20 sizes, 10–40 × 10–40 mm shank, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: external turning, facing and profiling.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

TNM. 1604..
TNM. 1103..
TNM. 2204..
TNM. 2706..

Choose a size ↓ Ask about PTJNR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Functional length (mm)	Functional width (mm)	Functional height (mm)	Shank width (mm)
PTJNR 3232 P16	TNM. 1604..	R	170	40	32	32
PTJNL 3232 P16	TNM. 1604..	L	170	40	32	32
PTJNL 1010 E11	TNM. 1103..	L	70	70	10	10
PTJNR 1010 E11	TNM. 1103..	R	70	70	10	10
PTJNL 1212 F11	TNM. 1103..	L	80	80	12	12
PTJNR 1212 F11	TNM. 1103..	R	80	80	12	12
PTJNL 1616 H11	TNM. 1103..	L	100	100	16	16
PTJNR 1616 H11	TNM. 1103..	R	100	100	16	16
PTJNL 1616 H16	TNM. 1604..	L	100	100	16	16
PTJNR 1616 H16	TNM. 1604..	R	100	100	16	16
PTJNL 2020 K16	TNM. 1604..	L	125	125	20	20
PTJNR 2020 K16	TNM. 1604..	R	125	125	20	20
PTJNL 2525 M16	TNM. 1604..	L	150	150	25	25
PTJNR 2525 M16	TNM. 1604..	R	150	150	25	25
PTJNL 2525 M22C	TNM. 2204..	L	150	150	25	25
PTJNR 2525 M22C	TNM. 2204..	R	150	150	25	25
PTJNL 3232 P22C	TNM. 2204..	L	170	170	32	32
PTJNR 3232 P22C	TNM. 2204..	R	170	170	32	32
PTJNL 4040 S27C	TNM. 2706..	L	250	250	40	40
PTJNR 4040 S27C	TNM. 2706..	R	250	250	40	40