SCFCR/L

22 sizes available · 8 specification fields · standard: ISO

SCFCR/L is a boring bar for internal turning that takes positive 80° rhombic (C-type) inserts. It is listed here in 22 sizes, 7.3–37.5 mm shank height, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

CC.T 0602..
CC.T 09T3..
CC.T 1204..

Choose a size ↓ Ask about SCFCR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Connection diameter (mm)	Functional length (mm)	Functional width (mm)	Shank height (mm)	Minimum working diameter (mm)
S08H SCFCL 06	CC.T 0602..	L	8	100	6	7.3	≥11
S08H SCFCR 06	CC.T 0602..	R	8	100	6	7.3	≥11
S10K SCFCL 06	CC.T 0602..	L	10	125	7	9	≥13
S10K SCFCR 06	CC.T 0602..	R	10	125	7	9	≥13
S12K SCFCL 06	CC.T 0602..	L	12	125	9	11	≥16
S12K SCFCR 06	CC.T 0602..	R	12	125	9	11	≥16
S12K SCFCL 09	CC.T 09T3..	L	12	125	9	11	≥16
S12K SCFCR 09	CC.T 09T3..	R	12	125	9	11	≥16
S16P SCFCL 09	CC.T 09T3..	L	16	170	11	14.8	≥20
S16P SCFCR 09	CC.T 09T3..	R	16	170	11	14.8	≥20
S20R SCFCL 09	CC.T 09T3..	L	20	200	13	18.3	≥25
S20R SCFCR 09	CC.T 09T3..	R	20	200	13	18.3	≥25
S25S SCFCL 09	CC.T 09T3..	L	25	250	17	23	≥32
S25S SCFCR 09	CC.T 09T3..	R	25	250	17	23	≥32
S25S SCFCL 12	CC.T 1204..	L	25	250	17	23	≥32
S25S SCFCR 12	CC.T 1204..	R	25	250	17	23	≥32
S32T SCFCL 12	CC.T 1204..	L	32	300	22	30	≥40
S32T SCFCR 12	CC.T 1204..	R	32	300	22	30	≥40
S40U SCFCL 12	CC.T 1204..	L	40	350	27	37.5	≥50
S40U SCFCR 12	CC.T 1204..	R	40	350	27	37.5	≥50
A08H SCFCL 06	CC.T 0602..	L	8	100	6	7.3	≥11
A08H SCFCR 06	CC.T 0602..	R	8	100	6	7.3	≥11