SD-CR/L

18 sizes available · 8 specification fields · standard: ISO

SD-CR/L is a boring bar for internal turning that takes positive 55° rhombic (D-type) inserts. It is listed here in 18 sizes, 9–37.5 mm shank height, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

DC.T 0702..
DC.T 11T3..

Choose a size ↓ Ask about SD-CR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Connection diameter (mm)	Protruding / projection length (mm)	Functional width (mm)	Shank height (mm)	Minimum working diameter (mm)
S10K SD-CL 07	DC.T 0702..	L	10	125	7	9	≥14
S10K SD-CR 07	DC.T 0702..	R	10	125	7	9	≥14
S12K SD-CL 07	DC.T 0702..	L	12	125	9	11	≥16
S12K SD-CR 07	DC.T 0702..	R	12	125	9	11	≥16
S16P SD-CR 07	DC.T 0702..	R	16	170	11	14.8	≥20
S16P SD-CL 07	DC.T 0702..	L	16	170	11	14.8	≥20
S20R SD-CL 07	DC.T 0702..	L	20	200	13	18.3	≥25
S20R SD-CR 07	DC.T 0702..	R	20	200	13	18.3	≥25
S16P SD-CL 11	DC.T 11T3..	L	16	170	14	14.8	≥22
S16P SD-CR 11	DC.T 11T3..	R	16	170	14	14.8	≥22
S20R SD-CL 11	DC.T 11T3..	L	20	200	15	18.3	≥25
S20R SD-CR 11	DC.T 11T3..	R	20	200	15	18.3	≥25
S25S SD-CL 11	DC.T 11T3..	L	25	250	18	23	≥32
S25S SD-CR 11	DC.T 11T3..	R	25	250	18	23	≥32
S32T SD-CL 11	DC.T 11T3..	L	32	300	22	30	≥40
S32T SD-CR 11	DC.T 11T3..	R	32	300	22	30	≥40
S40U SD-CL 11	DC.T 11T3..	L	40	350	27	37.5	≥50
S40U SD-CR 11	DC.T 11T3..	R	40	350	27	37.5	≥50