Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / S-System Boring Bars
SDPCR/L
10 sizes available · 8 specification fields · standard: ISO
SDPCR/L is a boring bar for internal turning that takes positive 55° rhombic (D-type) inserts. It is listed here in 10 sizes, 9–23 mm shank height, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- DC.T 0702..
- DC.T 11T3..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Connection diameter (mm) | Functional length (mm) | Functional width (mm) | Shank height (mm) | Minimum working diameter (mm) |
|---|---|---|---|---|---|---|---|
| S10K SDPCL 07 | DC.T 0702.. | L | 10 | 125 | 7 | 9 | ≥13 |
| S25S SDPCL 11 | DC.T 11T3.. | L | 25 | 250 | 17 | 23 | >32 |
| S10K SDPCR 07 | DC.T 0702.. | R | 10 | 125 | 7 | 9 | ≥13 |
| S12K SDPCL 07 | DC.T 0702.. | L | 12 | 125 | 9 | 11 | ≥16 |
| S12K SDPCR 07 | DC.T 0702.. | R | 12 | 125 | 9 | 11 | ≥16 |
| S16P SDPCL 11 | DC.T 11T3.. | L | 16 | 170 | 11 | 14.8 | ≥20 |
| S16P SDPCR 11 | DC.T 11T3.. | R | 16 | 170 | 11 | 14.8 | ≥20 |
| S20R SDPCL 11 | DC.T 11T3.. | L | 20 | 200 | 13 | 18.3 | ≥25 |
| S20R SDPCR 11 | DC.T 11T3.. | R | 20 | 200 | 13 | 18.3 | ≥25 |
| S25S SDPCR 11 | DC.T 11T3.. | R | 25 | 250 | 17 | 23 | ≥32 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DCON — Connection diameter (mm)
- LF — Functional length (mm)
- WF — Functional width (mm)
- H — Shank height (mm)
- D min — Minimum working diameter (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
