STUPR/L

14 sizes available · 8 specification fields · standard: ISO

STUPR/L is a boring bar for internal turning that takes positive 60° triangle (T-type) inserts. It is listed here in 14 sizes, 7.3–18.3 mm shank height, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

TP.. 1103..
TP.. 0802..

Choose a size ↓ Ask about STUPR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Connection diameter (mm)	Functional length (mm)	Functional width (mm)	Shank height (mm)	Minimum working diameter (mm)
S12K STUPR 1103	TP.. 1103..	R	12	125	9	11	≥16
S12K STUPL 1103	TP.. 1103..	L	12	125	9	11	≥16
S08H STUPL 0802	TP.. 0802..	L	8	100	5	7.3	≥10
S08H STUPR 0802	TP.. 0802..	R	8	100	5	7.3	≥10
S10K STUPL 1103	TP.. 1103..	L	10	125	6	9	≥12
S10K STUPR 1103	TP.. 1103..	R	10	125	6	9	≥12
S12M STUPL 1103	TP.. 1103..	L	12	150	8	11	≥16
S12M STUPR 1103	TP.. 1103..	R	12	150	8	11	≥16
S16P STUPL 1103	TP.. 1103..	L	16	170	10	14.8	≥20
S16P STUPR 1103	TP.. 1103..	R	16	170	10	14.8	≥20
S16R STUPL 1103	TP.. 1103..	L	16	200	10	14.8	≥20
S16R STUPR 1103	TP.. 1103..	R	16	200	10	14.8	≥20
A20R STUPL 1103	TP.. 1103..	L	20	200	13	18.3	≥25
A20R STUPR 1103	TP.. 1103..	R	20	200	13	18.3	≥25