SVQCR/L

20 sizes available · 8 specification fields · standard: ISO

SVQCR/L is a boring bar for internal turning that takes positive 35° rhombic (V-type) inserts. It is listed here in 20 sizes, 14.8–37.5 mm shank height, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

VC.T 1103..
VC.T 1604..

Choose a size ↓ Ask about SVQCR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Connection diameter (mm)	Functional length (mm)	Functional width (mm)	Shank height (mm)	Minimum working diameter (mm)
S16P SVQCL 11	VC.T 1103..	L	16	170	11	14.8	≥20
S16P SVQCR 11	VC.T 1103..	R	16	170	11	14.8	≥20
S20R SVQCL 11	VC.T 1103..	L	20	200	13	18.3	≥25
S20R SVQCR 11	VC.T 1103..	R	20	200	13	18.3	≥25
S25S SVQCL 16	VC.T 1604..	L	25	250	17	23	≥32
S25S SVQCR 16	VC.T 1604..	R	25	250	17	23	≥32
S32T SVQCL 16	VC.T 1604..	L	32	300	22	30	≥40
S32T SVQCR 16	VC.T 1604..	R	32	300	22	30	≥40
S40U SVQCL 16	VC.T 1604..	L	40	350	27	37.5	≥50
S40U SVQCR 16	VC.T 1604..	R	40	350	27	37.5	≥50
A16M SVQCL 11	VC.T 1103..	L	16	150	11	14.8	≥20
A16M SVQCR 11	VC.T 1103..	R	16	150	11	14.8	≥20
A20P SVQCL 11	VC.T 1103..	L	20	170	13	18.3	≥25
A20P SVQCR 11	VC.T 1103..	R	20	170	13	18.3	≥25
A25R SVQCL 16	VC.T 1604..	L	25	200	17	23	≥32
A25R SVQCR 16	VC.T 1604..	R	25	200	17	23	≥32
A32S SVQCL 16	VC.T 1604..	L	32	250	22	30	≥40
A32S SVQCR 16	VC.T 1604..	R	32	250	22	30	≥40
A40T SVQCL 16	VC.T 1604..	L	40	300	27	37.5	≥50
A40T SVQCR 16	VC.T 1604..	R	40	300	27	37.5	≥50