SVUCR/L

18 sizes available · 8 specification fields · standard: ISO

SVUCR/L is a boring bar for internal turning that takes positive 35° rhombic (V-type) inserts. It is listed here in 18 sizes, 11–37.5 mm shank height, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: boring, internal turning and back-facing.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

VC.T 1103..
VC.T 1604..
VC.T 0702..

Choose a size ↓ Ask about SVUCR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Connection diameter (mm)	Functional length (mm)	Functional width (mm)	Shank height (mm)	Minimum working diameter (mm)
S16P SVUCL 11	VC.T 1103..	L	16	170	12.5	14.8	≥20
S16P SVUCR 11	VC.T 1103..	R	16	170	12.5	14.8	≥20
S20R SVUCL 11	VC.T 1103..	L	20	200	13	18.3	≥25
S20R SVUCR 11	VC.T 1103..	R	20	200	13	18.3	≥25
S25S SVUCL 16	VC.T 1604..	L	25	250	19	23	≥32
S25S SVUCR 16	VC.T 1604..	R	25	250	19	23	≥32
S32T SVUCL 16	VC.T 1604..	L	32	300	22	30	≥32
S32T SVUCR 16	VC.T 1604..	R	32	300	22	30	≥32
S40U SVUCL 16	VC.T 1604..	L	40	350	27	37.5	≥50
S40U SVUCR 16	VC.T 1604..	R	40	350	27	37.5	≥50
A12K SVUCL 07	VC.T 0702..	L	12	125	9	11	≥16
A12K SVUCR 07	VC.T 0702..	R	12	125	9	11	≥16
A20P SVUCL 11	VC.T 1103..	L	20	170	13	18.3	≥25
A20P SVUCR 11	VC.T 1103..	R	20	170	13	18.3	≥25
A20Q SVUCL 11	VC.T 1103..	L	20	180	13	18.3	≥25
A20Q SVUCR 11	VC.T 1103..	R	20	180	13	18.3	≥25
A25R SVUCL 16	VC.T 1604..	L	25	200	19	23	≥32
A25R SVUCR 16	VC.T 1604..	R	25	200	19	23	≥32