Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / S-System Face And Copy End Mills
AEMR-RP
3 sizes available · 7 specification fields
AEMR-RP is a face milling cutter that takes RPNX-style inserts. It is listed here in 3 sizes, Ø25–32 mm shank, each with full specifications and a dimensioned drawing. Typical use: face milling and facing of flat surfaces.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- RPNX 10T3..
Specifications
| Product code | Insert designation | Connection diameter (mm) | Functional length (mm) | Maximum diameter (mm) | Head length (mm) | Effective cutting edges | Depth of cut, maximum (mm) |
|---|---|---|---|---|---|---|---|
| AEMR-RP10T3-D25-W25-L125-Z02 | RPNX 10T3.. | 25 | 125 | 25 | 60 | 2 | 5 |
| AEMR-RP10T3-D25-W25-L150-Z02 | RPNX 10T3.. | 25 | 150 | 25 | 60 | 2 | 5 |
| AEMR-RP10T3-D32-W32-L150-Z03 | RPNX 10T3.. | 32 | 150 | 32 | 60 | 3 | 5 |
Column codes
- Insert Code — Insert designation
- DCON — Connection diameter (mm)
- LF — Functional length (mm)
- DCX — Maximum diameter (mm)
- LH — Head length (mm)
- ZEFP — Effective cutting edges
- APMX — Depth of cut, maximum (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
