Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / S-System Highfeed End Mills
AHFM(C)-WD
4 sizes available · 9 specification fields · standard: DJT
AHFM(C)-WD is a high-feed milling cutter that takes 80° trigon (W-type) inserts. It is listed here in 4 sizes, Ø20–32 mm shank, right-hand versions, each with full specifications and a dimensioned drawing. Typical use: high-feed roughing at shallow depths of cut.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- WD.W 0503..
- WD.W 06T3..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Connection diameter (mm) | Functional length (mm) | Maximum diameter (mm) | Head length (mm) | Effective cutting edges | Depth of cut, maximum (mm) |
|---|---|---|---|---|---|---|---|---|
| AHFM-WD0503D-D20-C20-L150-Z02 | WD.W 0503.. | R | 20 | 150 | 20 | 50 | 2 | 1.25 |
| AHFM-WD0503D-D21-C20-L150-Z02 | WD.W 0503.. | R | 20 | 150 | 21 | 30 | 2 | 1.25 |
| AHFMC-WD06T3D-D26-C25-L200-Z02 | WD.W 06T3.. | R | 25 | 200 | 26 | 30 | 2 | 1.5 |
| AHFMC-WD06T3D-D33-C32-L200-Z03 | WD.W 06T3.. | R | 32 | 200 | 33 | 32 | 3 | 1.5 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- DCON — Connection diameter (mm)
- LF — Functional length (mm)
- DCX — Maximum diameter (mm)
- LH — Head length (mm)
- ZEFP — Effective cutting edges
- APMX — Depth of cut, maximum (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
