Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
SDACR/L-S
22 sizes available · 7 specification fields · standard: ISO
SDACR/L-S is an external turning holder for Swiss-type / sliding-head lathes that takes positive 55° rhombic (D-type) inserts. It is listed here in 22 sizes, 8–20 × 8–20 mm shank, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: external turning, facing and profiling of small parts.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- DC.T 0702..
- DC.T 11T3..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Functional length (mm) | Functional width (mm) | Functional height (mm) | Shank width (mm) |
|---|---|---|---|---|---|---|
| SDACL 0808 X07-S | DC.T 0702.. | L | 115 | 8 | 8 | 8 |
| SDACR 0808 X07-S | DC.T 0702.. | R | 115 | 8 | 8 | 8 |
| SDACL 1010 K07-S | DC.T 0702.. | L | 125 | 10 | 10 | 10 |
| SDACR 1010 K07-S | DC.T 0702.. | R | 125 | 10 | 10 | 10 |
| SDACL 1212 G07-S | DC.T 0702.. | L | 90 | 12 | 12 | 12 |
| SDACR 1212 G07-S | DC.T 0702.. | R | 90 | 12 | 12 | 12 |
| SDACL 1212 K07-S | DC.T 0702.. | L | 125 | 12 | 12 | 12 |
| SDACR 1212 K07-S | DC.T 0702.. | R | 125 | 12 | 12 | 12 |
| SDACL 1616 F07-S | DC.T 0702.. | L | 75 | 16 | 16 | 16 |
| SDACR 1616 F07-S | DC.T 0702.. | R | 75 | 16 | 16 | 16 |
| SDACL 1616 K07-S | DC.T 0702.. | L | 125 | 16 | 16 | 16 |
| SDACR 1616 K07-S | DC.T 0702.. | R | 125 | 16 | 16 | 16 |
| SDACL 1212 G11-S | DC.T 11T3.. | L | 90 | 12 | 12 | 12 |
| SDACR 1212 G11-S | DC.T 11T3.. | R | 90 | 12 | 12 | 12 |
| SDACL 1212 K11-S | DC.T 11T3.. | L | 125 | 12 | 12 | 12 |
| SDACR 1212 K11-S | DC.T 11T3.. | R | 125 | 12 | 12 | 12 |
| SDACL 1616 F11-S | DC.T 11T3.. | L | 75 | 16 | 16 | 16 |
| SDACR 1616 F11-S | DC.T 11T3.. | R | 75 | 16 | 16 | 16 |
| SDACL 1616 K11-S | DC.T 11T3.. | L | 125 | 16 | 16 | 16 |
| SDACR 1616 K11-S | DC.T 11T3.. | R | 125 | 16 | 16 | 16 |
| SDACL 2020 K11-S | DC.T 11T3.. | L | 125 | 20 | 20 | 20 |
| SDACR 2020 K11-S | DC.T 11T3.. | R | 125 | 20 | 20 | 20 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- LF — Functional length (mm)
- WF — Functional width (mm)
- HF=H — Functional height (mm)
- B — Shank width (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
