PTGNR/L

20 sizes available · 7 specification fields · standard: ISO

PTGNR/L is an external turning tool holder that takes negative 60° triangle (T-type) inserts. It is listed here in 20 sizes, 10–40 × 10–40 mm shank, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: external turning, facing and profiling.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

TNM. 1103..
TNM. 1604..
TNM. 2204..
TNM. 2706..

Choose a size ↓ Ask about PTGNR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Functional length (mm)	Functional width (mm)	Functional height (mm)	Shank width (mm)
PTGNL 1010 E11	TNM. 1103..	L	70	12	10	10
PTGNR 1010 E11	TNM. 1103..	R	70	12	10	10
PTGNL 1212 F11	TNM. 1103..	L	80	16	12	12
PTGNR 1212 F11	TNM. 1103..	R	80	16	12	12
PTGNL 1616 H11	TNM. 1103..	L	100	20	16	16
PTGNR 1616 H11	TNM. 1103..	R	100	20	16	16
PTGNL 1616 H16	TNM. 1604..	L	100	20	16	16
PTGNR 1616 H16	TNM. 1604..	R	100	20	16	16
PTGNL 2020 K16	TNM. 1604..	L	125	25	20	20
PTGNR 2020 K16	TNM. 1604..	R	125	25	20	20
PTGNL 2525 M16	TNM. 1604..	L	150	32	25	25
PTGNR 2525 M16	TNM. 1604..	R	150	32	25	25
PTGNL 3232 P16	TNM. 1604..	L	170	40	32	32
PTGNR 3232 P16	TNM. 1604..	R	170	40	32	32
PTGNL 2525 M22C	TNM. 2204..	L	150	32	25	25
PTGNR 2525 M22C	TNM. 2204..	R	150	32	25	25
PTGNL 3232 P22C	TNM. 2204..	L	170	40	32	32
PTGNR 3232 P22C	TNM. 2204..	R	170	40	32	32
PTGNL 4040 S27C	TNM. 2706..	L	250	50	40	40
PTGNR 4040 S27C	TNM. 2706..	R	250	50	40	40