Drag to rotate — real 3D model from the CAD file
Pick a size in the table below to see its own drawing and 3D model.
Tool Holders / S-System Cartridge
STSCR/L
6 sizes available · 9 specification fields · standard: ISO
STSCR/L is an insert cartridge that takes positive 60° triangle (T-type) inserts. It is listed here in 6 sizes, 11–20 × 8–15 mm shank, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: seating replaceable inserts in boring heads and special tools.
Insert compatibility
This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.
- TC.T 0902..
- TC.T 1102..
- TC.T 16T3..
Specifications
| Product code | Insert designation | Cutting direction (hand) | Functional length (mm) | Functional width (mm) | Shank width (mm) | Shank height (mm) | Functional height (mm) | Minimum working diameter (mm) |
|---|---|---|---|---|---|---|---|---|
| STSCL 08CA 09 | TC.T 0902.. | L | 28 | 10 | 8 | 11 | 8 | ≥25 |
| STSCR 08CA 09 | TC.T 0902.. | R | 28 | 10 | 8 | 11 | 8 | ≥25 |
| STSCL 10CA 11 | TC.T 1102.. | L | 44 | 14 | 11 | 15 | 10 | ≥40 |
| STSCR 10CA 11 | TC.T 1102.. | R | 44 | 14 | 11 | 15 | 10 | ≥40 |
| STSCL 12CA 16 | TC.T 16T3.. | L | 47 | 20 | 15 | 20 | 12 | ≥50 |
| STSCR 12CA 16 | TC.T 16T3.. | R | 47 | 20 | 15 | 20 | 12 | ≥50 |
Column codes
- Insert Code — Insert designation
- Product Direction — Cutting direction (hand)
- LF — Functional length (mm)
- WF — Functional width (mm)
- B — Shank width (mm)
- H — Shank height (mm)
- HF — Functional height (mm)
- D min — Minimum working diameter (mm)
Dimensions in millimetres unless noted. Values are the manufacturer's published figures.
Related families
