SDHCR/L

16 sizes available · 7 specification fields · standard: ISO

SDHCR/L is an external turning tool holder that takes positive 55° rhombic (D-type) inserts. It is listed here in 16 sizes, 8–32 × 8–32 mm shank, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: external turning, facing and profiling.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

DC.T 0702..
DC.T 11T3..

Choose a size ↓ Ask about SDHCR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Functional length (mm)	Functional width (mm)	Functional height (mm)	Shank width (mm)
SDHCL 0808 E07	DC.T 0702..	L	70	11	8	8
SDHCR 0808 E07	DC.T 0702..	R	70	11	8	8
SDHCL 1010 E07	DC.T 0702..	L	70	12	10	10
SDHCR 1010 E07	DC.T 0702..	R	70	12	10	10
SDHCL 1212 F07	DC.T 0702..	L	80	16	12	12
SDHCR 1212 F07	DC.T 0702..	R	80	16	12	12
SDHCL 1616 H07	DC.T 0702..	L	100	20	16	16
SDHCR 1616 H07	DC.T 0702..	R	100	20	16	16
SDHCL 1616 H11	DC.T 11T3..	L	100	20	16	16
SDHCR 1616 H11	DC.T 11T3..	R	100	20	16	16
SDHCL 2020 K11	DC.T 11T3..	L	125	25	20	20
SDHCR 2020 K11	DC.T 11T3..	R	125	25	20	20
SDHCL 2525 M11	DC.T 11T3..	L	150	32	25	25
SDHCR 2525 M11	DC.T 11T3..	R	150	32	25	25
SDHCL 3232 P11	DC.T 11T3..	L	170	40	32	32
SDHCR 3232 P11	DC.T 11T3..	R	170	40	32	32