STJCR/L

16 sizes available · 7 specification fields · standard: ISO

STJCR/L is an external turning tool holder that takes positive 60° triangle (T-type) inserts. It is listed here in 16 sizes, 8–32 × 8–32 mm shank, right- and left-hand versions, each with full specifications and a dimensioned drawing. Typical use: external turning, facing and profiling.

Insert compatibility

This family is built for the following insert designations (as listed in the catalogue data). The exact size in each row of the table below is in the Insert designation column.

TC.T 0902..
TC.T 1102..
TC.T 16T3..

Choose a size ↓ Ask about STJCR/L

Specifications

Product code	Insert designation	Cutting direction (hand)	Functional length (mm)	Functional width (mm)	Functional height (mm)	Shank width (mm)
STJCL 0808 E09	TC.T 0902..	L	70	10	8	8
STJCR 0808 E09	TC.T 0902..	R	70	10	8	8
STJCL 1010 E09	TC.T 0902..	L	70	12	10	10
STJCR 1010 E09	TC.T 0902..	R	70	12	10	10
STJCL 1212 F11	TC.T 1102..	L	80	16	12	12
STJCR 1212 F11	TC.T 1102..	R	80	16	12	12
STJCL 1616 H11	TC.T 1102..	L	100	20	16	16
STJCR 1616 H11	TC.T 1102..	R	100	20	16	16
STJCL 1616 H16	TC.T 16T3..	L	100	20	16	16
STJCR 1616 H16	TC.T 16T3..	R	100	20	16	16
STJCL 2020 K16	TC.T 16T3..	L	125	25	20	20
STJCR 2020 K16	TC.T 16T3..	R	125	25	20	20
STJCL 2525 M16	TC.T 16T3..	L	150	32	25	25
STJCR 2525 M16	TC.T 16T3..	R	150	32	25	25
STJCL 3232 P16	TC.T 16T3..	L	170	40	32	32
STJCR 3232 P16	TC.T 16T3..	R	170	40	32	32